LED EMERGENCY DRIVER
3-100W LED lamp with external driver
Input AC 85-265V~50/60Hz
Slim design: L210mm ×W40mm×H23mm
Non-maintained mode
Constant current output
SELV output
Overcharge, over discharge protection
Over temperature protection
Short circuit protection
Output Voltage: 10-300V
Emergency Power: 3W
Emergency Time: 180mins
Battery: LiFePO4 6.4V 1500mAh
Body: Aluminum alloy +ABS
 
General Functionality & Compatibility
 
Specification
Explanation
3-100W LED lamp with external driver
This driver is compatible with LED fixtures that consume between 3 and 100 watts and, crucially, already use an external primary LED driver. The emergency driver works in conjunction with the primary driver during normal operation and bypasses it to power the LED module directly during an outage.
Non-maintained mode
This is a critical safety designation. In non-maintained mode, the LED lamp is only illuminated by the emergency driver when the main AC power fails. During normal operation, the lamp is powered by the mains and its primary driver, and the emergency driver's battery is simply charging.
Slim design: L210mm ×W40mm×H23mm
The physical dimensions of the unit, indicating it is a small, linear driver often designed to be installed inside the light fixture housing or in a ceiling void.
Body: Aluminum alloy + ABS
The driver's casing is made from a combination of Aluminum alloy (likely for heat dissipation and strength) and ABS plastic (a durable, lightweight plastic).
 
Electrical & Power Specifications
 
Specification
Explanation
Input AC 85-265V~50/60Hz
This is the wide-range AC input voltage the driver accepts for charging the battery and monitoring power. It's compatible with both 120V and 220V/240V AC supplies globally.
Constant current output
In emergency mode, the driver delivers a fixed, regulated current to the LED. This is the standard method for properly powering an LED, ensuring stable light output and preventing damage.
SELV output
Safety Extra Low Voltage. This certification means the output circuit is electrically isolated from the mains and operates at a low enough voltage that it cannot cause an electric shock under normal or single-fault conditions.
Output Voltage: 10-300V
The range of voltage the driver can output in emergency mode. This wide range indicates the driver is designed to work with a long string of LEDs, commonly found in larger LED panels or tubes.
Emergency Power: 3W
The power output when the unit is running on battery power (emergency mode). The connected 3-100W lamp will only run at a reduced brightness of 3 watts to conserve battery life.
Emergency Time: 180mins
The minimum duration the driver will sustain the 3W emergency light output, which is 3 hours. This meets many standard building code requirements for emergency egress lighting.
 
Battery & Protection
 
Specification
Explanation
Battery: LiFePO4 6.4V 1500mAh
The battery type is Lithium Iron Phosphate, a highly stable, long-life, and safe lithium chemistry. The capacity is 6.4 Volts and 1500 milliampere-hours (mAh).